New Realities: COVID-19 disinfection for Realty and Property Management

COVID-19 response for property managers and realty concerns requires deep and thorough disinfection and decontamination of all surfaces that have the potential to harbor viral loads, including hard to reach areas, cracks, and crevices with proven disinfectant sanitizers. As coronavirus can be spread through fomites (droplets) on surfaces as well as linger in the air, it is especially critical in ventilation and high touch point areas. Without the proper equipment, it can take hours or even days to complete the enhanced disinfection necessary to achieve a confident level of hygiene assurance for your clients.

What does an enhanced disinfection procedure look like?

  • Written in 3 parts to cover pre-sanitizing, decontamination process, and post-sanitizing of all areas and surfaces within the areas.

  • Contains a written personal safety procedure.

  • Provides quality assurance by documenting/verifying results via swab or ATP testing.

  • Designates PPE is worn, including masks, eye protection, overalls, gloves, and shoe coverings.

  • Designates PPE is sanitized after each use or isolated for 3-7 days.

  • Designates “Safety zones” for workers to minimize exposure when donning and removing PPE.

  • Requires "Safety zones" to be disinfected after each use and cleaned daily

  • Provides isolated facilities with hand sanitizer for worker disrobing, showering, and dressing.


CBT-2020 speeds thorough, whole room decontamination processes to allow frequent disinfecting of common areas and/or precautionary and post home viewing or maintenance (before and after) to ensure sanitary conditions and protect the health and safety of visitors, tenants, buyers, realtors, maintenance and property management staff.


Far faster and more effective than manual chemical application, CBT-2020 conserves expensive chemicals and time. Unlike manual cleaning, CBT-2020 allows low-touch whole room decontamination/preventative disinfection far more rapidly, and does not waste chemical products, and lacks the potential for spread through inadvertent contamination of wipes, mop heads or toweling.


CBT-2020 can administer a fine micron vapor to disinfect airborne and surface-level areas (including vertical and underneath) from COVID-19 in a matter of minutes. The mechanically atomized vapor produced encourages chemical products to cling to surfaces and penetrate into cracks, crevices and hard-to reach areas to surfaces, without heating the chemicals, dripping or pooling. But there’s more to it than that.


The unique handle design allows instant, fingertip spray volume control to dial up from a fine “dry” vapor to spray a higher-volume saturating mist (and down to anything in between). This capacity allows users to vary volume to seamlessly transition to accommodate areas where over-doing volume might damage delicate materials or, conversely, where under-saturation might inadequately remove pathogens. For example, bathroom and kitchens are comprised of multiple materials, such as wood, porcelain, grouted tile, and steel drains. Furnished areas might feature, carpet and laminate, metal vents, wood furnishings, glass windows, textile draperies, and multiple types of upholstery. Each material may have a drastically different volume requirement than its neighbor. A sensitive, rapid response to surface textures can make all the difference.


Use CBT-2020 to deliver disinfectant products to support advanced decontamination procedures of:

  • Kitchens and bathrooms

  • Common areas

  • Lighting, ventilation, and appliances

  • Furnishings

  • Windows and doors

  • Walls, ceilings, and floors

  • Recycling and garbage pickup points

  • Offices and work areas

  • Vehicles

  • Health & fitness areas

  • Elevators and stairwells

LEARN MORE

9 views0 comments